Date:         Fri, 13 May 2005 00:51:12 -0500
Reply-To:     Al and Sue Brase <albeeee@MCHSI.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Al and Sue Brase <albeeee@MCHSI.COM>
Subject:      Re: Sliding Door Lock
Comments: To: RAlanen@AOL.COM
In-Reply-To:  <1b9.12fcd2cb.2fac9b91@aol.com>
Content-Type: text/plain; charset=us-ascii; format=flowed

Frank, John:
I'd agree with this decision, too. Just wait till it's NLA at the dealer
and you need it even worse! Maybe if you were restoring a 50's or
earlier old car, it would seem normal to rebuild a door latch, but you'd
gladly pick one up at a dealer even at $100!
Al Brase

Frank Condelli wrote:

>In a message dated 05/05/2005 9:51:40 PM Eastern Daylight Time,
>LISTSERV@GERRY.VANAGON.COM writes:
>
>I  ordered the latch from Camelback in Phoenix, AZ for $30.40. a bit
>steep but  I didn't want any used parts in there. I have a well used
>part, and it's  toast. This is one of those cases where new parts are in
>order. Don't want  to have to deal with a wornout part from another van.
>
>    John, I've been down this road before.  You'll  be happy you ordered a
>new one.  They have been "improved" in design.   You'll see what I mean when you
>get it.  Door will not pop open any longer  after you install the new lock !
>
>
>Cheers,
>
>Frank  Condelli
>Almonte, Ontario, Canada
>_BusFusion_ (http://members.aol.com/BusFusion/bfhome.htm)  a VW Camper
>camping event, Almonte, ON, June 09 ~ 12, 2005
>'87 Westy, '90 Carat &  Lionel Trains
>Member: _Vanagon List_ (http://www.vanagon.com/) , _LiMBO_
>(http://www.bcn.net/~limbo/) , _IWCCC_ (http://www.westfalia.qc.ca/)  & _CCVWC_
>(http://www.ccvwc.ca/)
>Vanagon/Vanagon Westfalia Service in  the Ottawa Valley
>_STEBRO/Vanagon Stainless Steel  Mufflers_
>(http://members.aol.com/Fkc43/stebro.htm)
>_Frank Condelli &  Associates_ (http://members.aol.com/Fkc43/busindex.html)
>or  http://frankcondelli.com
>
>
>