Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (May 2005, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 8 May 2005 08:31:20 EDT
Reply-To:     Trvlr2001@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         No Name Available <Trvlr2001@AOL.COM>
Subject:      Re: Since it's in the shop anyway . . .
Content-Type: text/plain; charset="US-ASCII"

Just wanted to add that there is a little three-way hose on the water pump, on the earlier models. You will probably have to order it, dont know the P/N or name of it though. I would replace it though, if you've got the water pump out. JC...

3. Check the water pump pulley shaft for bearing play and check for leaks at the vent hole on the underside of the pump. If problem found, this is a good time to replace it.


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.