OK - I can do basic tune-ups and other things - but where should I look for this wiring disorder? :) They replaced the sensor in the back left side as you are facing forward (near the head?) Thanks again, Andree On Sat, 28 May 2005, John Bange wrote: > Ja, like Karl says, your pressure sounds fine. The usual function of > the light is to FLASH at low pressure, and above 2000 RPM it flashes > and buzzes. Flickering or steady-on behavior indeed sounds like a > wiring fault. > > > Well...the oil pressure is (if I recall) 20 psi at 2000 rpm, and I have a > > new oil pressure sensor - the oil is 15/40 - and the light is brighter > > than it used to be and stays on just the same. Steady at idle, gets dim > > after 3000 rpm...oil looks fine, coolant looks fine, made it into Seattle > > today... > > > > Andree > > > Andree Hurley Viewit.com, Onwatersports.com Store Update: http://www.viewit.com/Merchant2/merchant.mvc? |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.