Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (May 2005, week 5)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 30 May 2005 09:43:26 -0500
Reply-To:     John Rodgers <inua@CHARTER.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         John Rodgers <inua@CHARTER.NET>
Subject:      Re: Traveling lighter... a goal... Kayak carriers, Lake Superior?
Comments: To: Trvlr2001@AOL.COM
In-Reply-To:  <2b.74096078.2fc9cba4@aol.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Klepper was the #1 folding boat - or Kayak of the time. Expensive but very fine German made folding kayak. Came in a one and two man version. First one I ever saw was on July 4, 1969 out Chena Pump Road near Fairbanks at the confluence of the Chena and Tanana Rivers. A river rafting contest was being held - from the start point on the Tanana down to Nenana as the takeout point. A days float. A couple came driving up in a Beetle, got out, took out two bags, and proceeded to assemble a Klepper Aerius - two man - picked it up, set it in the water, and paddled off down the river. I was fascinated. They made it look so easy. And I was particularly impressed as to h9ow easy it seemed they could paddle up stream. The Tanana is no slow river by any means.

In 1982 I bought my first folding Kayak. I still could not afford the Klepper, but did manage to buy it's competitor, the Folbot. Similar at the time to the Klepper, it was not so refined but handled OK. It used wood frames with aluminum tubes for the stringers. The tubes were in sections and could be broken down. The whole thing packed into two bags, very similar to the Klepper. The quality of the Folbot at the time was not so good as the Klepper, but I understand that today the quality of the workmanship has improved considerable. Were I to buy a new folding Kayak I might well get another Folbot.

BTW, the Folbot back then was made in Charleston, SC. I think it still is. They have a web site.

John Rodgers 88 GL Driver

No Name Available wrote:

>Hi All, >Back in the day, a long long time ago, in world, galaxies away.... >I started kayaking in what was called a fold boat. >German made, I think? >Fit into one or two small packages. >Anyone on the list remember these? >John C... > >In a message dated 5/27/2005 8:04:45 AM Pacific Daylight Time, >jefferrata@YAHOO.COM writes: >Stephen wrote: > > >>>Finally a question about kayaks, as we are heading >>> >>> >to the North Country and a circumnavigation of Lake >Superior (Jeff Earl...where's your travel blog?). A >fellow Listee and I will be traveling with wives and >young sons(one each). And we are discussing how many >bikes and kayaks we should bring along. The bikes are >easy enough to carry. The kayaks aren't. > > > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.