Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (June 2005, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 2 Jun 2005 07:53:08 -0700
Reply-To:     TJ Hannink <tjhannink@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         TJ Hannink <tjhannink@YAHOO.COM>
Subject:      Re: more choices in custom wheels.
Comments: To: Trvlr2001@AOL.COM
In-Reply-To:  <1e5.3d7f22f8.2fd0609e@aol.com>
Content-Type: text/plain; charset=iso-8859-1

You need a 9/16" drill bit to open up the lug holes and a 60 degree countersink bit to cut new conical lug seats. I did my Benz wheels about 4 years ago on a drill press, you take off very little material when doing these mods. Both cuts are self centering, so its pretty easy to do. I used standard 14-mm conical chrome lug nuts that you can pick up at any FLAPS on my Camper, I used a 14-mm stud kit on the front rotors instead of using the lug bolts. I keep a set of stock ball seat lugnuts in the Camper for the spare steel wheel.

The countersink bit should be available at any machine shop supply house, I spent about $18.00 for mine. If you would like to borrow it, give me your address and I will ship it to you. You can hang on to it and send it to the next person that needs it.

Pay it forward.

Tim

No Name Available <Trvlr2001@AOL.COM> wrote: In a message dated 6/1/2005 8:04:00 PM Pacific Daylight Time, syncro@GMAIL.COM writes: The wheels you are looking at will fit after a few modifications. Fist the CLK's used 12mm bolts. Your Vanagon uses 14mm studs/bolts. That means you will need to enlarge the lugholes and recontour the lugseats. Secondly, you need longer studs in back and longer bolts up front (unless you have a big brakes kit). The CLK wheels you are looking at appear to be the cast variety. The cast wheels have a thicker mounting pad. You will need to compensate for that. Hey Ben, What kind of machining would have to be done to the seats? What kind of cutters would I need to locate? I could arrange the mill work. JC...

TJ Hannink Goldibox - 1987 Vanagon Camper, Wolfsburg Edition 1981 Bluebird Wanderlodge, FC-33 Winter Park, Florida http://home.earthlink.net/~tjhannink/ http://groups.yahoo.com/group/wolfsburg_campers http://groups.yahoo.com/group/FC_wanderlodge FAVOR website: http://home.earthlink.net/~clubvanagon __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.