Hello listers! It seems that I must be obsessed with thermostats, because it's all I've been posting about recently! With great thanks to Boston Bob Donalds, I have all the pieces for mounting my thermostat to my 2.0L aircooled engine. I'm not sure how the cable attaches, though? There's a post coming out of the bellows on the cable side of things - on the blown thermostat, the outside of this post is threaded and there's a cable-holding cap that screws down over it. On the new thermostat (from Bus Depot) the threads are on the inside of the post... I've called in sick (*cough*) to work to get this engine finished today, so any advice MUCH appreciated!! :) Cheers! Mike. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.