Also check/clean all the ground wires, especially the big ground strap from the left side of the engine bay to the engine block. Try using a "remote starter switch" (from FLAPS, $8-$15) to see if the starter engages that way. MAKE SURE THE VAN IS IN NEUTRAL. Disconnect the small wire on the starter and put the switch leads between that terminal and the big wire on the starter. If the starter cranks now, perhaps your ignition switch is flakey.
On 6/12/05, Wesley Alden Pegden <wes@cs.uchicago.edu> wrote: > Hi all, > I just finished replacing my entire exhaust system... a lot of blood, sweat, and cash, and now my van won't start: |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.