Why guess or rely on anecdotes? The Bentley gives a spec for this. Same spec as any other Bosch alternator of the same type and vintage, afaik. Run engine at 3000 rpm with no electrical load until measured voltage is stable. Voltage at the alternator should be between 13.5 and 14.5 volts Mark George Goff wrote: >Good rule of thumb. > >Loaded down, the regulated voltage should between 13.8 and 14.8 V. Less, and >the battery is going to eventually go flat, more, and the battery boils..... > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.