Date:         Mon, 13 Jun 2005 14:23:18 -0700
Reply-To:     "Katherine J. Maas" <kathmaas@TELUS.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "Katherine J. Maas" <kathmaas@TELUS.NET>
Subject:      Re: newbie question - adjusting time on clock
Content-Type: text/plain; charset="ISO-8859-1"

Funny to see this thread because I have a clock question, too.  We had our
battery replaced last week, and the clock needed to be reset.  I have done
this many times in the past, but must have poked too hard or something this
time, because exactly what you said would happen if you pushed them at an
angle ‹ they got stuck.  I tried pulling off the dashboard cover (the piece
that sticks out over the speedometer, but this doesn¹t let me access the
clock buttons to get them back in the right position.  So what is the not
easy procedure for fixing this problem?

Katherine
-- 
Katherine J. Maas
³Every civilizing step in history has been ridiculed as Œsentimental,¹
Œimpractical,¹ or Œwomanish,¹ etc., by those whose fun, profit, or
convenience was at stake.² ­ J. Gilbert


------ Forwarded Message
From: George Goff <THX0001@AOL.COM>
Date: Mon, 13 Jun 2005 07:57:22 EDT
Subject: Re: newbie question - adjusting time on clock

turbodieseltrooper:

Just poke away, but only do your poking perpendicular to the face of the
clock.  Should you press the stylus you are using at an angle, the set
buttons can
become dislodged from their intended positions and hang up under the clock
face only to constantly cycle through the display numerals.  Even then, the
buttons can be brought back into their proper positions, but it is not easy
to do.

George

------ End of Forwarded Message