No need to remove axle nut to remove drum remove 2 small bolts, spray some lubricant into holes, hammer(easy) on flat part while prying drum off and even stubborn rusty one will come off.Make sure to release parking brake 46mm equivalent is 1 13/16. Leon On Sat, 18 Jun 2005 20:23:05 -0700, Dan Krautkremer <kd5ceu@YAHOO.COM> wrote: > Howdy to all again. > > I need a 46mm socket to pull the rear hub to replace > the brake shoes. Do I need to pull the hub to get the > drum off? Is there a "english" equivalent to the 46mm? > according to my measurements 46mm is very close to 1 > 5/8". Can someone confirm this? I can't find one > (46mm) locally and I need to get it done this weekend. > > > Danno > Delaware Water Gap, PA > > 89' Jetta > 86' Vangon > 79' Rocco > > > > ____________________________________________________ > Yahoo! Sports > Rekindle the Rivalries. Sign up for Fantasy Football > http://football.fantasysports.yahoo.com >
-- Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/ |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.