Doug: Sounds like your sensor died. Check the resistance across the contacts on the sensor to see if it falls within the spec. in the Bentley manual. There is a resistance/temperature chart in the cooling system section. TEMiller
----- Original Message ----- From: "Doug in Calif" <vanagon@ASTOUND.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Tuesday, June 21, 2005 11:37 AM Subject: Temp guage not reading anymore 89
Trying to figure out where to look first to fix my temp gauge in my 89 Wolfy. It was working fine and over the last few weeks has been reading lower and lower till now nothing. Any suggestions? Thanks, Doug |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.