> Now that I'm home, I put a recently acquired gauge set on it and, either > statically or with the compressor running (no low pressure cut out on my > '85), the low side and the high side read the same. Both are at 30#. If the engine is running and both the high and low side are reading the same 30psi, your compressor is not kicking in. This is typical of too little refrigerant. Kim Brennan 86 Syncro. 91 Westy Syncro. 90 Tristar Vienna VA. Sugar Grove WV. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.