Hi all, The bushing jumped out of the eye of my driver's side stabilizer link. After removing the eye link I'm wondering what's the easiest sequence to installing the eye bushing. 1.) press the bushing into the eye and working it over the end of the stabilizer bar before reinstalling the bolt end. or 2.) sliding the bushing onto the bar and persuading it into the eye while on the bar...before reinstalling the bolt end. Either way seems tough but I'm thinking getting it solidly in the eye would be easier off the truck and persuading the bar end through it then might not be as tough as trying it the other way.
-- Wil
"Nothing worse could happen to one than to be completely understood." -- Carl Gustav Jung |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.