Date:         Mon, 20 Jun 2005 20:57:22 -0400
Reply-To:     Dennis Haynes <dhaynes@OPTONLINE.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Haynes <dhaynes@OPTONLINE.NET>
Subject:      Re: What goes here?
Comments: To: Mike Jeffrey <oldbus@GMAIL.COM>
In-Reply-To:  <5fbed5aa05062012522532c248@mail.gmail.com>
Content-type: text/plain; charset=us-ascii

What engine/year?
Could you provide a little better description?

Dennis

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf
Of Mike Jeffrey
Sent: Monday, June 20, 2005 3:52 PM
To: vanagon@GERRY.VANAGON.COM
Subject: What goes here?

Hello listers,

What goes into the big threaded hole to the left (towards the back) of
intake #2 (right hand side, towards back)? I have a plain old bolt
that came out of the same hole in my old block... when I go to thread
it into the new block, it hits something inside before it snugs all
the way down.

If I remember correctly, it looks like the same kinda hole that
accepts the oil temp sensor in front of intake #3.

Thanks! It is, quite literally, the last bolt that needs bolting
before this engine gets started for the very first time!

Mike.