Sometimes it is difficult to remove. You can hit it hard with a hammer using a piece of two by four wood and still won't move. You can move it out more to avoid binding. But it will come off eventually. Keep those screws, you will need them later. Zoltan ----- Original Message ----- From: <JordanVw@AOL.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Friday, June 24, 2005 8:30 AM Subject: Re: need advice on how to pull sliding door cover off and not ruin paint or c...
> In a message dated 6/24/05 9:50:17 AM Eastern Daylight Time, > kayakwesty@YAHOO.COM writes: > > >> anybody got any BTDT on the cover? >> >> > > remove 2 screws, pull out .5 inch, and hit vertically with palm from > underneath lower lip > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.