Oops: I just hit it a little harder and it moved... I guess it was the metal ring on the pin that was stuck, which was why I was able to wiggle it around. Wes On Mon, Jun 27, 2005 at 11:05:36AM -0500, Wesley Alden Pegden wrote: > Hi guys, > I went to remove my (left) front brake pad to get a look at the condition. I have the van on a jack stand with the wheel off. It looks like I have what the haynes manual calls the "Trever" style calliper: two pins which punch out towarrds the car. At least, that's how it *should* work. > > After removing one pin (the lower one) without trouble, the upper one won't punch out. I've punched it loose enough that I can turn it with my fingers (or a wrench), and wiggle it back and forth a bit, but can't get it to puch out. I can't tell what's holding it---it certainly looks like it should come out. Has anybody had this problem? Any ideas? > > Thanks very much for any suggestions, > Wes > 84 1.9l |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.