My passenger side window is dreadfully slow. Any suggestions? The driver side is reasonable... My assumption is the wireing/connection between the drivers side switch and the window motor is old and there are loses through the connectors. Is the best/easiest solution just to run a new wire parralell from the drives side switch? IIRC the power trace runs from the fuse box, to the driverside switch and then over the passenger door... need to check benetly to be sure. Thanks, Jon |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.