Not to be exceedingly dense but how do I determine if there is a vacuum leak? I'm not really sure which lines are vacuum and which are not. Does any of our list vendors sell some kind of kit to replace all these 27 year old plastics? David H
------------------------------ Date: Tue, 28 Jun 2005 10:37:44 -0400 From: Wil Haslup <wil@CHARMFX.COM> Subject: Re: 82 Aircooled Temp II sensor ohm's Wil Haslup wrote: <<< Just MHO but I've found starting problems like this are more often related to vacuum. Specifically I found at least one leak where the clamp a previous owner put on to hold the rubber fitting cut into it and it was nearly impossible to notice without removing the clamp. >>> |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.