Date:         Wed, 22 Jun 2005 09:13:47 -0700
Reply-To:     Mike Jeffrey <oldbus@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Mike Jeffrey <oldbus@GMAIL.COM>
Subject:      Hose ID
Content-Type: text/plain; charset=ISO-8859-1

Hello! Another question for you all - thanks so much for all of your
help so far :) Vehicle in question is an '83 2.0 liter aircooled CA.

I need to pick up a hose today, but forgot to bring the old one to
work with me for comparison... there's a tube going from a rubber T at
the plenum up to the deceleration valve - this tube is held to the
valve with a short length of rubber hose. It's that short length of
hose that I need to pick up - the current one is brittle and cracked.
Can anyone tell me the inner diameter of that hose?

Thank you kindly!
Mike.

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.