Date:         Tue, 28 Jun 2005 15:15:32 -0400
Reply-To:     "Higginbotham, David A." <dhigginbotham@HAZENANDSAWYER.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "Higginbotham, David A." <dhigginbotham@HAZENANDSAWYER.COM>
Subject:      Re: 82 Aircooled Temp II sensor ohm's
Content-Type: text/plain; charset="us-ascii"

Not to be exceedingly dense but how do I determine if there is a vacuum
leak? I'm not really sure which lines are vacuum and which are not. 

Does any of our list vendors sell some kind of kit to replace all these
27 year old plastics?

David H



------------------------------

Date:    Tue, 28 Jun 2005 10:37:44 -0400
From:    Wil Haslup <wil@CHARMFX.COM>
Subject: Re: 82 Aircooled Temp II sensor ohm's

Wil Haslup wrote:
<<<
Just MHO but I've found starting problems like this are more often
related to vacuum.  Specifically I found at least one leak where the
clamp a previous owner put on to hold the rubber fitting cut into it and
it was nearly impossible to notice without removing the clamp.
>>>