Date:         Fri, 1 Jul 2005 13:03:26 -0500
Reply-To:     jake beaulieu <jbeaulie@ND.EDU>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         jake beaulieu <jbeaulie@ND.EDU>
Subject:      Re: 82 Aircooled Temp II sensor ohm's
Comments: To: "Higginbotham, David A." <dhigginbotham@HAZENANDSAWYER.COM>
In-Reply-To:  <57DAA45518967B49931D2122BA96E6A7010C67F3@hsnc-mail.hazenandsawyer.com>
Content-Type: text/plain; charset="us-ascii"

Check out www.bus-boys.com and follow the link for "Gas Fuel Injection Parts
- Vanagon Air Cooled L-Jetronic 80-83".  They have a schematic for the hoses
that link into the deceleration valve and simply describe most of the other
hoses.  I thought the diagram was more complete than that.  It should still
get you started.

Jake
-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM] On Behalf Of
Higginbotham, David A.
Sent: Wednesday, June 29, 2005 10:05 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: 82 Aircooled Temp II sensor ohm's

Jake wrote:
<<<
I replaced all the vacuum lines on my 82 air cooled Westy.  Bus Boys has
a
pretty nice website that shows a schematic of all the vacuum lines in
the
engine bay.  You can click on each hose individually and it shows you
the
Bus Boys part# and price. 
>>>


Thanks guys for all the help. I plan to look for the leaks this weekend,
in the meantime I'm ordering parts, I agree with the replace all of them
since they're all old, when I figure out which ones are vacuum.

Jake: I can not find the schematic you are talking about at
www.bus-boys.com, If you have a minute would you send me a link.

Thanks again,
David H