Date: Thu, 7 Jul 2005 23:11:58 -0700
Reply-To: David Marshall <mailinglist@FASTFORWARD.CA>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: David Marshall <mailinglist@FASTFORWARD.CA>
Subject: Re: Optima Battery safety question
In-Reply-To: <a06020404bef3a468fe77@[10.0.0.102]>
Content-Type: text/plain; charset="US-ASCII"
Basically looks exactly how I installed my battery, but, those terminals are
very close to the sheet metal that makes the wheel housing. Also, if you
were to turn your van upside down [like in a roll over situation] what
prevents the battery from coming out?
I don't mean to sound critical, just that I want to be safe about this by
having a battery that won't move unless *I* move it or the vehicle gets into
a *severe* accident where a flying battery will be the least of my concerns.
David Marshall
Fast Forward Automotive Inc.
4356 Quesnel-Hixon Road
Quesnel BC Canada V2J 6Z3
http://www.fastforward.ca mailto:sales@fastforward.ca
Phone: (250) 992 7775 FAX: (250) 992 1160
- Vanagon Accessories and Engine Conversions
- Vanagon, Transporter and Iltis Sales and Importation
- European Lighting for most Volkswagen models
Due to the large volume of email we receive, PLEASE include previous
emails when responding. This will allow us to read the complete dialogue
in one message and will result in quicker and more accurate responses.
-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf
Of Paul Guzyk
Sent: July 7, 2005 8:43 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Optima Battery safety question
Here's what I did on one install:
http://www.californiavan.com/battery/Battery.html
1) Remove the upper turntable if the van has Westy seats then chop
about 1 1/2 inches away from the rear section of the lower turntable
base. (see photo) I used a Dremel cutting wheel to remove the
section.
2) Use the Optima without side terminals, the way nothing can short
to the battery cover tin.
3) Shim the battery compartment with wood blocks to keep the battery
from moving about.
4) Cover the positive terminals with an old rubber inner tube just to
be extra safe.
5) Use a Surepower model 1315 battery separator instead of the wimpy
VW relay. While the Surepower is a tad expensive at $70, it's the
best possible way to hook up two batteries in a Vanagon. Intelligent
charging, automatic separation when engine is off and automatic 2nd
battery starter assist for those times when you left the park lights
on....it's also compatible with Subaru alternators and the VW
alternator idiot light without having to do any extra wiring.
-Paul Guzyk
>Tonight I installed a Group 34 Optima battery in my TriStar. I did as many
>people have done, laid it over on it's side so the terminals point forward
>and then secure the battery clamps. Has anyone ever started arc-welding
>using this method or have a battery be a projectile in an accident? With
>the battery on it's side the positive clamp is only a few millimetres away
>from the floor under the seat and there is no way of securing the battery.
>What I did to make me feel half at ease, is use the stock clamp down bar to
>force the battery to the rear of the tray so it can't lift up and used four
>layers of water softening salt bag under the positing terminal so will not
>[hopefully] touch if the Syncro goes on a weird angle or gets into an
>accident... but it can still slide from side to side - if it goes too much
>to the passenger side the positive clamp will touch the factory battery
>retaining bar. I have inserted a 2x4 and a 1x4 piece of wood on the
>passenger side of the battery to keep it in the driver side of the tray...
>someone please tell me there is a more elegant and safe way of doing this!
>
>David Marshall
