In a message dated 7/21/05 4:52:28 PM, rogersisler2000@YAHOO.COM writes: << Plug the drain hole with jb weld stick. >> What is this fixation on JB Weld? If you want the lowest tech repair, get a piece of well seasoned hardwood and bung the thing. I'll bet there are work boats used every day on the Chesapeake that have had such repairs in place for more than fifty years. I once made a temporary filler plug for a chainsaw oil tank by sanding a hardwood dowel to a slight taper then gashing some threads in it with a three corner file. Although I meant to get a new plug, that day has never come. All kidding aside, I think the best road for Barry to follow is to use an expansion repair plug made just for the purpose at hand. George |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.