In a message dated 7/20/05 12:44:27 AM, phlogiston420@GMAIL.COM writes: << i once attempted to remove this . . .tin . . . but after using more strength than i thought prudent, i was only able to get the bolts out halfway! of course i am referring to the bolts which attach the down pipes to the exhaust manifold and also hold the mounting arms for this plate. >> The fasteners could be rubbing hard against the walls of their holes in the head pipe flange. Also, they might be hunging up on the engine tin mounting lugs. Try loosening both fateners on the head pipe flange, then pry on the flange up, down, left and right (relative to the head) as you are backing out the fastener. You'll know once you find the sweet spot; just don't go animal on the prying part of this exercise. George |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.