Route your new belt from the water pump to the alt. and then to the corresponding crankshaft pulley groove. I am guessing that you are putting the belt on the groove for the a/c or powersteering.1/2 inch belt deflection in the middle of the largest span with moderate pressure is the tightening spec.(real scientific ). Does you van have a/c and powersteering? If not, cant imagine what is chewing up your belts.The bracket that is on the bottom of the alt.is much stronger than the brace you are looking at.This bracket will aligne the alt.Is it tight? The bentley shows no spacers. Is a alt. fan blade bent? |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.