Date:         Thu, 21 Jul 2005 10:27:51 EDT
Reply-To:     THX0001@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         George Goff <THX0001@AOL.COM>
Subject:      Re: How to replace voltage regulator?
Comments: To: j.michael.elliott@GMAIL.COM
Content-Type: text/plain; charset="US-ASCII"

In a message dated 7/21/05 10:21:26 AM, j.michael.elliott@GMAIL.COM writes:

<< This thing has a couple of graphite brushes sticking out, spring-loaded.

I expect that a fellow is meant to smoosh them into the case before

trying to insert the regulator body into the alternator. Does someone

have some Handy Hints for this plucky squirrel? >>

Just undo the two mounting screws then "roll" the regulator out and towards
the center of the alternator.  Installing the new one is just the opposite
action with no need to retract the brushes.

George

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.