I just now put one in from napa part#(782-1600) with the green light ring . It was to small and pulled through the dash hole but I solved this by using a rad. fan switch crush washer to back it up with. Perfect! looks stock, and now works with "normal " accessaries. I cut and replaced connectors but a set of adapter jumpers could be made to preserve the wiring harness if you desired
jeffe Atl. Ga. 1987' westy weekender |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.