Date:         Sat, 23 Jul 2005 13:23:39 -0400
Reply-To:     Kim Brennan <kimbrennan@MAC.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Kim Brennan <kimbrennan@MAC.COM>
Subject:      Re: replacing all carpet - what else...
Comments: To: dusty edwards <dusty.edwards@mac.com>
In-Reply-To:  <0610bb3dd67651a184bf7e08f5593477@mac.com>
Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed

Best place to be able to lift the carpet is right where the stock
wiring goes, Along the inboard side of the drivers feet area. That's
where the cable from the Parking Brake goes (for the light on the
dash). It's a convienent place to run wires for stereo equipment too
as you can run the wires into the box under the drivers seat through
the hole where the seatbelt wires go.

You, of course, also need to be able to lift the carpet on the LEFT
side of the drivers feet area as that's the fill up area for the
windshield wiper fluid
tank.
On Jul 22, 2005, at 8:14 PM, dusty edwards wrote:


>
> sewfine is doing the job for me and it's necessary that they glue the
> custom kit to the van.  there is wiring running from my aux.
> battery to
> the dash, under the carpet.  sewfine is going to give me the option of
> not glueing a specific area of the carpet down so that the wiring is
> easily accessed.  any ideas where would be the best place?  does
> anybody have experience with this?
>