Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (August 2005, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:   Mon, 1 Aug 2005 20:08:40 -0700
Reply-To:   Jeffrey Schwaia <jeff@VANAGONPARTS.COM>
Sender:   Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:   Jeffrey Schwaia <jeff@VANAGONPARTS.COM>
Subject:   Re: COLD START PROBLEM!!!!!!!!! anyone!!!!!
Comments:   To: Benoit <huotb@VIDEOTRON.CA>
In-Reply-To:   <42EEE0CB.8070103@videotron.ca>
Content-Type:   text/plain; charset="iso-8859-1"

Not really. All you need is a noid light. Anyone who works on Bosch FI should have a noid light. They're cheap, buy one.

Cheers,

Jeff

-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM]On Behalf Of Benoit Sent: Monday, August 01, 2005 7:56 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: COLD START PROBLEM!!!!!!!!! anyone!!!!!

That is my choice also... but for that, i need a spare distributor.....

Ben

Dennis Haynes wrote:

> Last long shot. Defective distributor pick up or ignition module > causing multiple injector firings. BTDT! Injectors should only trigger > once each complete engine revolution. > > > > Dennis > > > > -----Original Message----- > From: Benoit [mailto:huotb@videotron.ca] > Sent: Monday, August 01, 2005 10:36 PM > To: Dennis Haynes > Cc: vanagon@GERRY.VANAGON.COM > Subject: Re: COLD START PROBLEM!!!!!!!!! anyone!!!!! > > > > Both wire where replace, ground, and main to computer..... every other > wire were tripple check to each and every single element... with a ohm > meter... i tell you brother... i have checked everything..... am > missing something... 3 other posibilities... AFM, distributors or ECU, > but i have a ECU... it may be faulty... am not sure... > > Regards, Ben > > Dennis Haynes wrote: > >The temp 2 sensor has one wire to the sensor, the other goes to ground. A > >wire may be broken in the harness. Try connecting another ground to it. > > > >Dennis > > > >-----Original Message----- > >From: Benoit [mailto:huotb@videotron.ca] > >Sent: Monday, August 01, 2005 10:24 PM > >To: Dennis Haynes > >Cc: vanagon@GERRY.VANAGON.COM <mailto:vanagon@GERRY.VANAGON.COM> > >Subject: Re: COLD START PROBLEM!!!!!!!!! anyone!!!!! > > > >Injectors are working fine, tested... and spaying fine.... but thanks, > >i will double check just in case.... > > > >Grounds were check and cleaned... like everything else.... like i said, > >the only false readind was the temp2, but this one was replace... and > >it's still giving me a bad reading.... wire to the ECU was replace, > >reading good... but still no start... > > > >Ben > > > >Dennis Haynes wrote: > > > > > >>A shorted harness may be keeping the injectors open. The black smoke >> >>indicates a temp 2 problem. Could be missing a ground somewhere. >> >> >> >>Dennis >> >> >> >>-----Original Message----- >> >>From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of >> >>Benny boy >> >>Sent: Monday, August 01, 2005 2:44 PM >> >>To: vanagon@GERRY.VANAGON.COM <mailto:vanagon@GERRY.VANAGON.COM> >> >>Subject: COLD START PROBLEM!!!!!!!!! anyone!!!!! >> >> >> >>Grrrrrrrrrrrrr...... me again...good, am gonna burn that 84... he he he... >> >> >> >>Recapitulation: >> >>84, rebuilt head job... >> >> >> >>Problem: no start when cold, and now, no start when hot!!!! >> >>Black smoke with heavy hesitation, kind a feel a it's flooded! >> >> >> >>injecting brake cleaner in intake to start the van as a boost is the only >> >>way to start that van... when hot, everything is ok except for a lack of >> >>power after déceleration... and hitting back the gas pedal... >> >> >> >>Fuel pressure as a slow leak, but a very slow one... every vaccum is >> >>plugued, ECU as been replace, as for temp 2 and other stuff... i don't have >> >>a spare 1.9 dijiget AFM, so i cannot do that test, but, by bentley, that >> >> >> >AFM > > > >>looks ok.. >> >> >> >>Everything as been replace... injectors tested, fuel reg as been replace >> >>with no change... am replacing the fuel pump tomorrow.... and the filter... >> >>but still... the aux. air reg. valve is open so i should have a "cold >> >>start"... >> >> >> >>I feel that i have a fuel pressure ploblem... but am not sure... fuel >> >>pressure is ok.... >> >> >> >>Compression: ok >> >> >> >>Help >> >> >> >>Ben >> >>http://www.benplace.com/ >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> > > > > > > > > > > > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.