<< I then filled the valve stem cap with about two cents worth of JB Weld so the air would stay in there. That was the best modification I ever did. Free alignment, the van steers nice and straight now. >> I'm in the same library Georgie. Just used a little different product. Devcon 5 minute steel epoxy. But the front end still shook a little. My next move cured the shimmey shimmey co-co pop. I removed the plastic stem caps and used stainless caps filled with the Devcon epoxy. The front end is perfect. That little extra weight did the trick. You think you have a patent on instant roadside repair's? Back of the Bus. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.