Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (August 2005, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 15 Aug 2005 09:56:23 -0400
Reply-To:     ROBERT DONALDS <donalds1@VERIZON.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         ROBERT DONALDS <donalds1@VERIZON.NET>
Subject:      Re: 1.9L still a problem child (update)
Comments: To: Jonce Fancher <streetbugs@WHISPLLC.COM>
Content-type: text/plain; format=flowed; charset=iso-8859-1; reply-type=original

This sounds like the cylinders got filled with oil and the compression numbers and the fouling are goimg to resolve themselves when you drive it You cant tell much from a cold engine other than its worth a shot at starting and sorting out. you may need to replace the plugs more than once and change the oil often while you sort it out to prevent the gas build up in the oil wait until the engine settles down after it been hot a couple of times then preload the valves

goiing faster miles an hour with the radio on I remain Bob Donalds Boston Engine Exchange

----- Original Message ----- From: "Jonce Fancher" <streetbugs@WHISPLLC.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Monday, August 15, 2005 6:48 AM Subject: Re: 1.9L still a problem child (update)

> im lost on this one as well. i will try adjusting the valves loose like i > do for a type 1 motor and do another compression test. also im wondering > if the cylinders > had a bunch of residual oil in them when i did the compression test before > install that it sealed evereything. the guy i got this from had R/R the > rings and > head gaskets a few years prior to pulling for a inline conversion. motor > was fine on pulling but didnt have a compression check before pulled. im > going to try > and do a valve adjust tonight. thanks Jonce > >>You did a compression test after it sat on a crate for 2 years, and it >>had up to 170 lbs. compression. > >>You install it. > >>The compression drops to 15 lbs. > >>How can this be? > >>Either a valve is hanging open, or the rings magically got stuck >>somehow. > >>Back off the valve's and re adjust them first. > >>Then see if you have any better compression. > > > > Jonce Fancher > > 57 Single Cab > 66 Sunroof Bug > 66 Variant Squareback > 71 Sunroof Bus > 75 911S Sunroof > 84 Vanagon "Godfried" > 85 Vanagon Westi > 2003 10 Passenger Sprinter > > Fancher's Upholstery Inc. - www.fanchers.com > Not-A-VW Club- http://mywebpages.comcast.net/jaransont3/notavwclub/ >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.