Date:         Thu, 18 Aug 2005 19:27:51 -0400
Reply-To:     Wesley Pegden <wes@CS.UCHICAGO.EDU>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Wesley Pegden <wes@CS.UCHICAGO.EDU>
Subject:      while changing UCA bushings, what else should I do?
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Hi guys,
I'm going to change my upper control arm bushings, in the hope of
relieving my suspension woes.  What else should I change at the same
time?  Are there other things that are easy to do while your doing this?

Also, is there anything about this job I should know?  I'm just planning
on going through the procedure in my Haynes manual.

Thanks for any tips!
wes
'84 vanagon

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.