Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (August 2005, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Fri, 19 Aug 2005 13:35:17 -0400
Reply-To:     The Bus Depot <vanagon@BUSDEPOT.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         The Bus Depot <vanagon@BUSDEPOT.COM>
Subject:      Re: exhaust system
Comments: cc: jeffg <jeffg@MIKOEXOTICWEAR.COM>
In-Reply-To:  <NNEEJMJFBGMFHCFFOIHDKEKAEAAA.jeffg@mikoexoticwear.com>
Content-Type: text/plain; charset="us-ascii"

> my exhaust system is gone..so my mechanic wants $1200 to > replace the whole thing..including catalytic converter, > muffler and all pipes...busdepot has it all for about $550.00 > on the parts...not being to mechanically inclined, is this a > good project to do myself? any secrets to succcess?

Installation is relatively straightforward, but removing the old parts can sometimes be difficult. Exhaust nuts have a tendancy to seize due to a combination of rust and prolonged exposure to heat, making them challenging to remove. The same can apply to the 02 sensor, although you can always just replace it while you're there, which will avoid that issue. You may need a good penetrating oil such as Kroil, or a small torch, to help get the old setup off. Or maybe not; you won't know until you try. At that point, bolting the new stuff up isn't that hard, since you're replacing everything at once (It can be more difficult if you're trying to re-use some of the old pipes, as they may be tweaked and won't easily mate to the new ones. Replacing everything at once is easier.)

As another alternative, you could see what a local muffler shop will charge to install the parts if you supply them. While the Vanagon exhaust system is somewhat convoluted compared to most, the actual installation process isn't really that different from what a muffler shop is used to doing. It's not like they're going to have to bleed the coolant system or something that absolutely necessitates Vanagon expertise. Basically it's just a matter of hanging the exhaust and getting the connections tight, and they're used to dealing with seized exhaust nuts. I have often found that muffler shops will do this sort of work as well as, but cheaper than, VW specialists. Of course, like any other repair shop, both the price and quality of workmanship can vary from one to the next.

- Ron Salmon The Bus Depot, Inc. www.busdepot.com (215) 234-VWVW

_____________________________________________ Toll-Free for Orders by PART # : 1-866-BUS-DEPOT


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.