In a message dated 23/08/2005 3:12:05 PM Eastern Daylight Time, LISTSERV@GERRY.VANAGON.COM writes: Has any one tried the above ? Is the zinc coating inside holding up=20 how is the outside rust proofing where they rust around the=20 fuel sensor in the recess in the middle of the tank
Tim, these are the tanks I use here. For best results and longevity they should be prepped and coated with POR 15 prior to installation. They will last a lifetime afterwards if you keep the tank full during storage to prevent internal rusting. Cheers, Frank Condelli Almonte, Ontario, Canada '87 Westy, '90 Carat & Lionel Trains Vanagon/Vanagon Westfalia Service in the Ottawa Valley _Frank Condelli & Associates_ (http://members.aol.com/Fkc43/busindex.html) or http://frankcondelli.com _STEBRO/Vanagon Stainless Steel Mufflers_ (http://members.aol.com/Fkc43/stebro.htm) _BusFusion_ (http://members.aol.com/BusFusion/bfhome.htm) a VW Camper camping event, Almonte, ON, June 09 ~ 12, 2005 |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.