Hi guys, sooo.... after deciding to change my upper control arm bushings, I finally looked up the job in my Haynes manual, to find THIS under the section on the "upper wishbone: removal and refitting": "If renewal of the bushes is necessary, this work must be carried out by a VW dealer". So, uhh, is there some way around this? I haven't done any spot welding, which is apparently what this calls for, and am on a REAL tight budget right now... do I need to just put this job off 'till later? Thanks for any tips, Wes |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.