Date:         Wed, 24 Aug 2005 01:38:12 EDT
Reply-To:     THX0001@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         George Goff <THX0001@AOL.COM>
Subject:      Re: loose dipstick
Comments: To: ptreyesone@YAHOO.COM
Content-Type: text/plain; charset="US-ASCII"

In a message dated 8/23/05 5:02:07 PM, ptreyesone@YAHOO.COM writes:

<< I presume this is not normal--what is the fix for this? >>

Install a new dipstick tube ("sleeve") seal.  It is merely an O-ring,
although it might be a square-section one.  In the process of replacing the seal, if
you ruin the crimped clamp which holds the dipstick tube to its bracket,
replace it with a minature hose clamp.

George

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.