Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (August 2005, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 27 Aug 2005 16:28:51 -0700
Reply-To:     Jack Cook <john.cook58@VERIZON.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jack Cook <john.cook58@VERIZON.NET>
Subject:      Re: The nature of dielectric grease; was Re:      Charging better
Comments: To: Robert Fisher <refisher@MCHSI.COM>
In-Reply-To:  <005c01c5ab4b$36b3ff30$657ba8c0@MAIN>
Content-type: text/plain; charset=US-ASCII

from: "Dictionary of Scientific and Technical Terms", McGraw-Hill.

"dielectric A material which is an electrical insulator or in which an electric field can be sustained with a minimum dissipation in power."

For our purposes (auto electrics), it's used to protect the metal conductors from corrosion. When slathered on the actual contact surfaces, metal to metal forces will displace it; ie, you now have a metal to metal contact which is protected from the environment. At least this is what's supposed to happen ... Of course, it doesn't last forever.

Hope that helps.

//Jack

On 27 Aug 2005 at 14:06, Robert Fisher wrote:

> I'm puzzled about how people use this stuff. I put a big blob of it on a > piece of wood and checked it with my multimeter. No conductivity on any > scale. > > The dictionary defines 'dielectric' as: "A nonconductor of electricity, > especially a substance with electrical conductivity of less than a millionth > (10-6) of a siemens" > > If I'm not mistaking this and any number of past posts, folks seem to be > using this as an aid to conductivity. > > I thought it was used to, say, keep yer plug boots from getting stuck, or as > a corrosion/dirt/etc. barrier outside of a connection that in itself would > not conduct the juice in that connection to something else. > > I suppose I could be misinterpreting what folks are saying about their use > of the stuff... I also suppose that if you coated a contact with it you > could still get conductivity where the grease was pushed aside and you had > metal-to-metal contact, but that seems iffy. > > Am I missing something here? > > Cya > Robert >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.