Date:         Sun, 28 Aug 2005 22:16:13 -0700
Reply-To:     David Richoux <tubaman@TUBATOAST.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Richoux <tubaman@TUBATOAST.COM>
Subject:      Re: rear left light assembly  corrosion
Content-Type: text/plain; charset=US-ASCII; format=flowed

Hi all,

I have been off the list for a few years (for various reasons  - I
still have my 83.5 Westy) but I also have the same problem with bad
corrosion in the left tail light assembly. I just ordered a replacement
part  but this will be the 2nd time around. Has anybody tried any kind
of surface coating on the metal circuit strips or making a better seal
around the tail light  assembly box?  ( I did a search of the archives
with only one related message from Year 2000 resulting... nobody else
ever had this problem?)

Dave Richoux  83.5 Westy Los Altos CA

  On Aug 28, 2005, at 9:00 PM, Automatic digest processor wrote:

> From:    Wesley Pegden <wes@CS.UCHICAGO.EDU>
> Subject: rear left light assembly needed
>
> Hi all...
> my rear left light assembly (brakes/turn signal/etc.) has been lost to
> rust, so I need a new one, as cheap as possible (though hopefully one
> that isn't cracked and about to be lost to rust again just like the one
> I just lost...).  If you have one, let me know!
> Thanks,
> Wes