Hi Volks, I always like to here how problems were fixed. My problem was a flickering oil press idiot light. I traced the wire from the press sending unit and it looks like I did have it grounding at a broken connector. Twenty five miles later and still no idiot light, thanks Roger. I was thinking thought if I wanted to mount an oil press gauge where would I put the new sender. Is the press sender for the light the only location I could tap into? It wouldn't be too hard to tee off there. Does any one know what the thread is? Thanks again for any help you can give. Stephen DeMocko ('85 West Luci) |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.