It's been about 6 months since I pulled out my 2.1L WBX to install my TD. Now that I have the TD bolted in, and have connected the various sensor wires, which I of course labelled and confirmed with Bentley, I have a few extra wires which I can't seem to find in Bentley, and I didn't label as I knew I'd only need the sensors ;-). But if some of them give me a straight run to the dash, they would come in handy for other things. Here they are: One large double spade plug, with a red and red/bk wire. I'm guessing this is 12V always on, and 12V with ignition? One single spade black wire, bundled with above. One small double spade plug (same size as the coolant level sender) with one brown, one black wire. All the Digifant harness came out nicely, so that's all I have left for wiring, and if I can use some these for the glow plug relay and extra gauges, it would be nice to keep it clean. Thanks. Shawn Wright http://zuiko.sls.bc.ca/~swright '85 Jetta D '88 Westy 2.1L, soon to be 1.6TD 5 speed (see progress at http://members.shaw.ca/vwdiesels) '82 Diesel Westy |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.