Date:         Thu, 1 Sep 2005 09:15:12 -0700
Reply-To:     Stephen DeMocko <SDeMocko@FDSMFG.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stephen DeMocko <SDeMocko@FDSMFG.COM>
Subject:      oil press light revisited
Content-Type: text/plain; charset="us-ascii"

Hi Volks,
 
I always like to here how problems were fixed.  My problem was a
flickering oil press idiot light.  I traced the wire from the press
sending unit and it looks like I did have it grounding at a broken
connector.  Twenty five miles later and still no idiot light, thanks
Roger.  I was thinking thought if I wanted to mount an oil press gauge
where would I put the new sender.  Is the press sender for the light the
only location I could tap into? It wouldn't be too hard to tee off
there.  Does any one know what the thread is? Thanks again for any help
you can give.
 
Stephen DeMocko
('85 West Luci)