Date:         Mon, 5 Sep 2005 22:50:20 -0700
Reply-To:     David Hally <davegh@PACBELL.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Hally <davegh@PACBELL.NET>
Subject:      Re: Liquid electrical tape????
In-Reply-To:  <6da5793405090514421d54e9e@mail.gmail.com>
Content-Type: text/plain; charset=iso-8859-1

I've used spray on Plastic coating for tool handles to repair the hall
sensor wiring on my BMW motorcycle. Its held for 2 years and a lot of
miles so far. It right there in the front of the motor housing that
gets fairly hot.
Dave Hally

--- John Bange <jbange@GMAIL.COM> wrote:

> "Liquid Tape" by a company called "Plasti Dip", or 3M's 14853
> "Electrical
> Coating". I haven't used Liquid Tape, personally, but we used CASES
> of the
> 3M stuff on all the wiring makeups for Luxor Las Vegas outdoor tree
> lighting
> retrofit some 10+ years ago (awful job), and it's apparently still
> working
> fine. Stinky stuff until it cures, though.
>
> On 9/5/05, Barrett Willet <barrettw@nventure.com> wrote:
> >
> > Does a product exist that acts like liquid electrical tape for
> > resealing cracks in wiring insulation? I've come across so many
> > places where electrical tape is too hard to wrap or places where I
> > can't slip heat shrink over because of a large connector.
> > I once tried Seam Sealant for sealing tent seams on a crack but it
> > didn't seem to last.
> > Would be cool if there was some way to "dab" on something to seal
> > things up.
> >
>