Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (September 2005, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 6 Sep 2005 22:29:22 -0500
Reply-To:     Stan Wilder <wilden1-1@SBCGLOBAL.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stan Wilder <wilden1-1@SBCGLOBAL.NET>
Subject:      Re: Dipstick oil level
Comments: To: Larry Chase <roadguy@ROADHAUS.COM>
Content-Type: text/plain; charset="iso-8859-1"

It's a matter of proving it to yourself. Your engine will run hotter with the oil up to the max mark. It will run cooler with the oil down about 1/8" below the max mark. This difference only represents about 1/2 quart but it will make a difference. Run you engine at the max mark for a few days and them remove enough oil to drop the level down below the max mark. Of course you won't prove anything if you don't have a good quality temperature gauge measuring oil temperature and with a WBX you should also be measuring the water temperature. I've seen lower oil temperatures on my 356c, 912e, 66 westy, 83 westy all with air cooled engines. Checking the oil on my dry sump 911 is somewhat different but even with a remote oil tank I seem to have lower operating temperatures at highway speeds if the oil level is lower. If the oil tank is overfilled you can definitely see higher highway temperatures. ------------------------------- I think it all has to do with the crankshaft slinging oil in the case and your oil being more foam that you'd get with lesser oil in the pan. I know a windage tray is a definite plus in controlling oil foaming and oil mist in the crankcase.

Stan Wilder Engine Ceramics 214-352-4931 www.engineceramics.com

----- Original Message ----- From: "Larry Chase" <roadguy@ROADHAUS.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Tuesday, September 06, 2005 10:08 PM Subject: Dipstick oil level

Volks,

Somewhere along the line I became convinced that the correct amt of oil in a Vanagon Waterboxer engine, was 1/2 way between the Dipstick "max' and "min" marks.

Even though the owners manual states,

"The oil level is correct if it is between the "max" and "min" marks on the dipstick".

Searching thru the archives I find several references to this.

But I'm curious what the current collective think is on this?

What say you?

good road, good adventure

larry chase

www.roadhaus.com www.roadhaus.com/shops.html www.roadhaus.com/tires.html


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.