Date:         Tue, 6 Sep 2005 20:16:31 -0700
Reply-To:     Shawn Wright <swright@ZUIKO.SLS.BC.CA>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Shawn Wright <swright@ZUIKO.SLS.BC.CA>
Subject:      '88 wiring connector identification
Comments: To: diesel-Vanagon@yahoogroups.com
Content-type: text/plain; charset=US-ASCII

It's been about 6 months since I pulled out my 2.1L WBX to install my TD.
Now that I have the TD bolted in, and have connected the various sensor
wires, which I of course labelled and confirmed with Bentley, I have a few
extra wires which I can't seem to find in Bentley, and I didn't label as I
knew I'd only need the sensors ;-). But if some of them give me a straight
run to the dash, they would come in handy for other things. Here they are:

One large double spade plug, with a red and red/bk wire. I'm guessing this
is 12V always on, and 12V with ignition?

One single spade black wire, bundled with above.

One small double spade plug (same size as the coolant level sender) with
one brown, one black wire.

All the Digifant harness came out nicely, so that's all I have left for wiring,
and if I can use some these for the glow plug relay and extra gauges, it
would be nice to keep it clean.

Thanks.
Shawn Wright
http://zuiko.sls.bc.ca/~swright
'85 Jetta D
'88 Westy 2.1L, soon to be 1.6TD 5 speed
 (see progress at http://members.shaw.ca/vwdiesels)
'82 Diesel Westy