Date:         Thu, 8 Sep 2005 18:39:04 -0400
Reply-To:     Edward Duntz <eduntz@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Edward Duntz <eduntz@HOTMAIL.COM>
Subject:      Re: rear wheel bearings--> sizes
Comments: To: Matthew <mpteleski@YAHOO.COM>
Content-Type: text/plain; charset="iso-8859-1"

I thought I may have needed a wheel bearing replaced, so I checked with a
local NAPA dealer on prices for wheel bearings and seals. It would have cost
about $120 for the inner and outer bearings and seals. Then I checked on the
Bus Depot web site. $40 for the whole kit. I can't tell you the specs, but
if you want a cheap kit, go with Bus Depot.

Ed in CT
----- Original Message -----
From: "Matthew" <mpteleski@YAHOO.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Thursday, September 08, 2005 3:17 PM
Subject: rear wheel bearings--> sizes


> i need to replace a rear wheel bearing. i have a
> bearing supply place in town, but no specs on the
> bearings (w/o taking it apart). Does etka show the
> specs on the bearings and seals? if so, what are they?
>
> thanks
> mp
> 86 syncro
>
> "Racing with the wind and flirting with death
> So have a cup of coffee and catch your breath"
>
>
>
>
> ______________________________________________________
> Click here to donate to the Hurricane Katrina relief effort.
> http://store.yahoo.com/redcross-donate3/
>