Date:         Sat, 17 Sep 2005 16:14:16 -0500
Reply-To:     Stan Wilder <wilden1-1@SBCGLOBAL.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stan Wilder <wilden1-1@SBCGLOBAL.NET>
Subject:      Re: Need ideas to fix gas tank leak
Comments: To: Larry Chase <roadguy@ROADHAUS.COM>
Content-Type: text/plain; charset="iso-8859-1"

http://jbweld.net/products/index.php


 J-B STIK Part No. 8267-S
Quick, easy and clean. J-B STIK Weld is a hand kneadable, steel-reinforced
epoxy putty adhesive/sealant that will plug holes and make permanent repairs
on wet and dry surfaces. It will even cure completely submerged in water or
GASOLINE! Simply knead thoroughly, with your fingers, a portion necessary
for the repair and apply. J-B Stik will fully cure 20-30 minutes; and can be
drilled, sanded, filed, tapped, machined, and painted. J-B Stik requires no
tools or "prep time", and makes no mess.

Stan Wilder
Engine Ceramics
214-352-4931
www.engineceramics.com


----- Original Message -----
From: "Larry Chase" <roadguy@ROADHAUS.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Saturday, September 17, 2005 12:19 PM
Subject: Need ideas to fix gas tank leak


> Folks,
>
> I've got a gas leak coming from the nipple at the bottom of the gas tank.
>
> Appears to be leaking around the seal between the nipple and the tank
>
> Photo Here:
>
> http://www.roadhaus.com/images/Temp/Gas%20Leak%201b.jpg
>
> Any ideas on an epoxy and repair process?
>
>
>
> good road,
> good adventure,
> good life,
>
> larry chase
>
> www.roadhaus.com
> www.roadhaus.com/shops.html
> www.roadhaus.com/tires.html