Date:         Sun, 18 Sep 2005 13:10:27 -0700
Reply-To:     Rob <becida@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Rob <becida@COMCAST.NET>
Subject:      Re: Sum' b*tch - Rear Heater Shroud
Comments: To: John Rodgers <inua@CHARTER.NET>
In-Reply-To:  <432DB8FF.9020705@charter.net>
Content-Type: text/plain; charset="us-ascii"; format=flowed

At  9/18/2005 11:59 AM, John Rodgers wrote:
>Time to fix the rear heater.
>
>How the devil does one get the heater core shroud off?
>
>Any suggestions on how to deal with this one would be most appreciated.
>I definitely don't want to have to muck with the seat framing.

As I recall (I did it to an 86 syncro back in 1996) I had to pull the
seat but that was not as hard as it looked. As I recall....



Rob
becida@comcast.net

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.