Hi, I'm trying to remove the upper nut on the driver side front shock (to remove the shock). When I turn the nut, it just turns the shaft. I tried grabbing the shaft above the nut with a vise grip to hold it in place, but I ended up just twisting off the top of the shaft. Is there something I'm missing here? What usually prevents the shaft from turning? My next plan is to take a hacksaw to the shaft just below the nut. Sounds okay? Thanks for any tips, Wes '84 1.9l |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.