Date:         Sun, 2 Oct 2005 22:50:41 +0200
Reply-To:     Raimund Feussner <rfeussner@GMX.DE>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Raimund Feussner <rfeussner@GMX.DE>
Subject:      Re: Hacksaw to remove upper nut for front shock?
Comments: To: Wesley Pegden <wes@CS.UCHICAGO.EDU>
In-Reply-To:  <43402F8C.6090409@cs.uchicago.edu>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

If you want to replace the shock, use the hacksaw.
Usually, the nut on the shock is covered by a plastic cover, preventing
it from rusting. But on most of the Vanagons, the cover is missing and
causes the nut to rust tight. Bad engineering (again)...

Raimund


Wesley Pegden schrieb:

> Hi,
> I'm trying to remove the upper nut on the driver side front shock (to
> remove the shock).  When I turn the nut, it just turns the shaft.  I
> tried grabbing the shaft above the nut with a vise grip to hold it in
> place, but I ended up just twisting off the top of the shaft.  Is there
> something I'm missing here?  What usually prevents the shaft from
> turning?  My next plan is to take a hacksaw to the shaft just below the
> nut.  Sounds okay?
> Thanks for any tips,
> Wes
> '84 1.9l
>
>
>