To bad you did not find something concussive to hang your hat on. best of luck Bob Donalds Boston Engine if you feel the need to give me a call at some point please do so 1 508 358 6264
----- Original Message ----- From: "Bill Collins" <wb6otg@INTREX.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Monday, October 10, 2005 9:05 AM Subject: Water in the oil update
> Over the weekend, I removed the cylinders, cleaned things up, replaced all > the cylinder o-rings, and put the engine back together. I hesitated to > remove the cylinders, but they really aren't hard to re-install, with the > engine out of the van. > > I found that the left side pushrod tubes were longer than they should have > been. I assume this means that the head hung up on something and didn't > seat properly. That would certainly explain the water in the oil! > > Thanks for all the advice on this problem. > > Bill > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.